Using The 6 X 9 Cm Film Holder - Microtek Artix Scan1100 Hardware User's Manual

D. Using the 6 x 9 cm Film Holder
1. Insert the film to be scanned into the 6 x 9 cm Film
Holder.
a) Push on the side to open the holder.
b) Place the film in the holder.
c) Pull the side down to close the holder.
2. Place the 6 x 9 cm Film Holder in the Main Holder.
3. Insert the whole assembly into the transparency bay
(the drawer or lower compartment) of the scanner.
ArtixScan 1100 Hardware User's Guide
6 x 9 cm
Film
Holder
Main
Holder
23