Function Setting; Initialization; Change Password - Coban GPS103-A User Manual

Gsm/gprs/gps vehicle tracker
Hide thumbs Also See for GPS103-A:
Table of Contents

Advertisement

7
tracker works normal.
5.4 GSM/GPS LED Indicator
5.4.1 Red LED indicator on: No GSM network signals.
5.4.2 Red LED indicator flash fast (one time each second): GSM Network
signal is normally, and tracker works under GSM mode.
5.4.3 Red LED indicator flashes slowly (one time each three second): Tracker
works under GPRS mode.
5.4.4 Blue LED indicator on: GPS signal is normal.
5.4.5 Blue LED indicator off: No GPS signal.

6. Function setting

6.1 Initialization

Send SMS "begin+password" to the unit, it will reply "BEGIN,CONFIG OK "
and initialize all the settings to default factory settings.(default password:
123456)
For example: send SMS "begin123456", it will reply "BEGIN,CONFIG OK ".
The "+" in the command, please don't type "+", space means press the
space keyboard on your cell phone.

6.2 Change Password

6.2.1 Send SMS
"password+old password+space+new
password" to the unit
to change the password.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gps103-b

Table of Contents