Call Back; Call Waiting; Dtmf; Loudspeaking Function - ASCOM d41 User Manual

User Manual
Ascom d41 DECT Handset
2 Select "Conference call"
3 Press "Select".
The person initiating the conference call is the conference leader, and the other are
participant members of the conference call.

6.3.10 Call Back

When a call is made to a busy handset, it is possible to automatically call back when the
busy handset is free. When a busy tone louds, do as follows:
1 Press the "More" soft key during the call.
2 Select "Call back"
3 Press "Select".
4 Press
5 When the handset alerts, press

6.3.11 Call Waiting

During a call when the line is busy, do as follows:
1 Press the "More" soft key.
2 Select "Call waiting"
3 Press "Select". The other part will get a "Call waiting" signal.
When the line is free it will automatically call the number again. This is system dependent.

6.3.12 DTMF

1 Press the "More" soft key during the call.
2 Select "DTMF".
3 Press "Select". This will enable the use of Dual Tone Multi Frequency (DTMF)
signals.
6.3.13 DECT Info
This option is only visible if the Admin menu is activated. See Configuration Manual,
Ascom d41 DECT Handset, TD 92641GB for more information.
6.4

Loudspeaking Function

How to activate the loudspeaking function is dependent of the choice of answering
method. An incoming call can be connected with loudspeaking function active by pressing
left soft key. During a call, a press on the left soft key activates the loudspeaking function.
Press the left soft key again to turn it off.
6.5

Call Diversion

All calls; internal calls, external calls, calls when busy, or calls at no answer can be diverted
to another handset number. The diversion is made via the Calls menu > Call services >
Divert calls. See
1. Only visible if defined in PDM.
2009-12-15/ Ver. C
1
.
1
.
and wait until the handset alerts.
1
.
Divert Calls on page 31.
and the call will automatically be started.
TD 92582GB
25