Basic Operation; Switch The Handset On/Off; Turn The Audible Signal On/Off; Lock/Unlock The Keypad - ASCOM d41 User Manual

User Manual
Ascom d41 DECT Handset
5

Basic Operation

5.1

Switch the Handset On/Off

The handset is switched off:
1 Press and hold On-hook key
When pressing the On-hook key, the handset will vibrate och the display lights up.
2 A dialog window "Switch on?" is displayed. Confirm by pressing "Yes".
The handset is in idle mode:
1 Press and hold On-hook key
2 A dialog window "Switch off?" is displayed. Confirm by pressing "Yes".
5.2

Turn the Audible Signal On/Off

A long press on
The icon indicates a silenced handset.
5.3

Lock/Unlock the Keypad

Lock/Unlock the Keypad
5.3.1
To prevent accidentally pressing keys and making a call, the keys can be locked.
Lock Keypad
Press
Unlock Keypad
Press
Note: It is possible to answer/end an incoming call while the keypad is locked. If
configured in the PDM, it is also possible to call an emergency call while the keypad is
locked. See Configuration Manual, Ascom d41 DECT Handset, TD 92641GB.
5.3.2 Lock/Unlock the Keypad during a Call
To prevent accidentally pressing keys, the keys can be locked during a call. This can be
useful when a headset is used and the handset is attached to a pocket or belt.
Lock keypad
1 Longpress
2 Press "Lock".
Unlock keypad
1 Press
2 Press "Yes".
2009-12-15/ Ver. C
in idle mode, changes between ring signal on/off.
and then "Lock".
and then "Yes".
.
.
.
in Idle Mode
TD 92582GB
19