Call Back; Send Call Waiting; Answering Call Waiting - ASCOM d41 User Manual

User Manual
Ascom d41 DECT Handset
The person initiating the conference call is the conference leader, and the other are
participant members of the conference call.

5.3.10 Call Back

When a call is made to a busy handset, it is possible to automatically call back when the
busy handset is free. When a busy tone sounds, do as follows:
1 Press the "More" soft key during the call.
2 Select "Call back"
3 Press "Select".
4 Press
5 When the handset alerts, press

5.3.11 Send Call Waiting

This feature can be used when you want to announce a person that you are trying to reach
him/her by sending a notification tone to his/her handset. When the person is engaged in a
call, do as follows:
1 Press the "More" soft key.
2 Select "Call waiting"
3 Press "Select". The other part will get a "Call waiting" signal.
When the line is free it will automatically call the number again. This is system dependent.

5.3.12 Answering Call Waiting

Depending on system setup and configuration, this feature might be handled in one of two
different ways:
Method 1
During an ongoing conversation and a short tone for another incoming call appears, do as
follows:
1 Press the soft key "More" during the call.
2 Select "Answer Call waiting".
3 Press "Select". The new call is now connected, and the first call is on hold.
When the line is free, the call on hold will automatically be dialled again. This is a system
dependent feature.
Method 2
If a second caller calls during a phone call, the handset will beep and display the text
"Internal call" for internal callers and "External call" for external callers. The handset will also
show the name or phone number of the second caller. To answer the second caller:
1 Press the soft key "Accept".
The text "Switch" briefly appears on screen, and the handset transfers to the second call.
The first call is put on hold.
2 When finished speaking with the first caller, select the "More" soft key.
3 Select "End Call".
1. Only visible if defined in PDM.
30 April 2013 / Ver. I
1
.
and wait until the handset alerts.
1
.
and the call will automatically be started.
TD 92582EN
21