Hitachi WH 18DSDL Safety Instructions And Instruction Manual page 10

rl--I
I
I
English
2. BatteryCharger (UC18YRSL)
Pilot lamp
Cord
rail
SPECIFICATIONS
1. CordlessImpact Driver/Wrench
Fig.2
Nameplate
Model
No-load speed
Capacity
Tightening torque
(Maximum)
Power mode
Savemode
Small screw
Ordinary bolt
Hightension bolt
WH18DSDL
0 - 2,600/min
0 - 2,000/min
5/32"- 3/8" (M4- M10)
1/4"- 9/16"(M6 - M14)
1/4"- 15/32"(M6 - M12)
Power mode 1,510in-lbs.
{170 N.m}
Savemode 840in-lbs.
{95 N.m}
Tightening is 9/16"(M14) high
tension bolt, when fully charged
at 68°F(20°C)temp.
Tightening time: 3 sec.
WR18DSDL
3/8"- 23/32"(M10- M18)
5/16"- 9/16"(M8 - M14)
Power mode 188ft.lbs.
{255 N.m}
Savemode 103ft.lbs.
{140 N.m}
Tightening is 5/8" (M16)F10T,
when fully chargedat 68°F
(20°C)temp.
Tightening time: 5 sec.
Bit shanksize 1/4" (6.35mm) Hex. 1/2"(12.7mm) square
Rechargeable battery BSL1830:Li-ion 18 V (3.0Ah)
Weight 3.7 Ibs. (1.7kg)
2. BatteryCharger (UC18YRSL)
Input power source Single phase:AC 120V 60 Hz
Chargingtime Approx. 45 min.
Chargingvoltage DC14.4V- 18 V
Charger DC14.4V: DC3.5 A
Chargingcurrent DC 18V: DC3.5 A
Weight 1.3 Ibs. (0.6 kg)
NOTE: T he charging time may vary accordingto temperature and power source voltage.
lO
01Eng WH18DSDL US.p65 10 11/19/12, 1:19 PM