Barco BARCOREALITY SIM 6 MK II + WARP 6 Owner's Manual page 138

7. Service Mode
COLOR
Primary Color to adjust
GREEN IN RED
Image 7-6
Select the desired Primary Color to adjust
TINT
Primary Color to add
GREEN IN RED
Image 7-8
Select a Primary Color to add
How to Toggle DynaColor On/Off?
1. Push the cursor key ↑ or ↓ to highlight Active [OFF]. (menu 7-43)
2. Press ENTER to toggle DynaColor On/Off.
DYNACOLOR
ADJUST
ACTIVE [OFF]
DEFAULT
INITIALIZE
Select with ↑ or ↓
<ENTER> to toggle/select
<EXIT> to return
Menu 7-43
How to set DynaColor back to the Default settings?
1. Push the cursor key ↑ or ↓ to highlight Default. (menu 7-44)
2. Press ENTER to set DynaColor back to the Default settings.
DYNACOLOR
ADJUST
ACTIVE [OFF]
DEFAULT
INITIALIZE
Select with ↑ or ↓
<ENTER> to toggle/select
<EXIT> to return
Menu 7-44
134
LEFT
GREEN IN RED
0
Image 7-7
Select the left, right or both sides
GREEN IN RED
LEFT
0
Adjustment Slider
BRIGHTNESS
Image 7-9
Adjust the level of adding the second Primary Color
BALANCE
Adjustment Side
LEFT
0
LEFT
R5976496 BARCOREALITY SIM 6 MK II + WARP 6
0
15052003
TM