Linearity Reset; Reset Fine; Reset Blanking/Soft Edge - Barco BARCOREALITY SIM 6 MK II + WARP 6 Owner's Manual

5. Random Access

5.6.7.10.3 Linearity Reset

How to reset the Linearity adjustments ?
1. Push the cursor key ↑ or ↓ to highlight Linearity within the Geometry Reset menu. (menu 5-131)
2. Press ENTER to select.
A warning will be displayed . (menu 5-132)
3. Press ENTER to reset the Linearity adjustments
Or,
Press EXIT to return to the Geometry Reset menu.
GEOMETRY RESET
COARSE
LINEARITY
FINE
BLANKING/SOFT EDGE
ALL
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-131

5.6.7.10.4 Reset Fine

How to reset the Fine adjustments ?
1. Push the cursor key ↑ or ↓ to highlight Fine within the Geometry Reset menu. (menu 5-133)
2. Press ENTER to select.
A warning will be displayed . (menu 5-134)
3. Press ENTER to reset the Fine adjustments
Or,
Press EXIT to return to the Geometry Reset menu.
GEOMETRY RESET
COARSE
LINEARITY
FINE
BLANKING/SOFT EDGE
ALL
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-133

5.6.7.10.5 Reset Blanking/Soft Edge

How to reset the Blanking/Soft Edge adjustments ?
1. Push the cursor key ↑ or ↓ to highlight Blanking/Soft Edge within the Geometry Reset menu. (menu 5-135)
2. Press ENTER to select.
The Soft Edge Reset menu will be displayed. (menu 5-136)
3. Push the cursor key ↑ or ↓ to highlight Soft Edge or All in the Soft Edge Reset menu.
Soft Edge Only the Soft Edge Width values will be reset to their default values.
All All Blanking/Soft Edge values will be reset to their default values.
102
WARNING
This action will
reset the selected
geometry settings!
are you sure?
<ENTER> to confirm
<EXIT> to return
Menu 5-132
WARNING
This action will
reset the selected
geometry settings!
are you sure?
<ENTER> to confirm
<EXIT> to return
Menu 5-134
R5976496 BARCOREALITY SIM 6 MK II + WARP 6 15052003
TM