Rename - Barco BARCOREALITY SIM 6 MK II + WARP 6 Owner's Manual

Source number
Clamp delay
Clamp width
Sync
pulse
Clamp
pulse
Image 5-1
Example for Clamp position [trailing]
Field polarity

5.3.5.4 Rename

Start Up
To change the name of a selected file :
1. Push the cursor key ↑ or ↓ to highlight Rename. (menu 5-12)
2. Press ENTER.
The Rename selection menu will be displayed. (menu 5-13)
3. Push the cursor key ↑ or ↓ to select a file name.
4. Press ENTER to select.
The Rename file menu will be displayed with the selected file name already filled in, leave in the 'From file name :' area and in
the 'To file name :' area. The first character in the 'To file name :' area is highlighted.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-12
R5976496 BARCOREALITY SIM 6 MK II + WARP 6
The source number of a non-active source can be changed to any other source number. This makes
it possible to create a file for future source numbers.
The time between the leading edge of the clamp pulse and the locked edge of the sync pulse. Can be
any value between 0 and 255. Change the value by pushing the cursor key ↑ or ↓.
The width of the clamp pulse can be any value between 0 and 255. Change the value by pushing
the cursor key ↑ or ↓.
Clamp Clamp
delay width
The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a
wrong way (double lines are visible in the image). This can be corrected by forcing the field polarity to
[neg] or [pos]. Use the ENTER key to toggle between [pos] and [neg].
RENAME FILE
Filename Scr
xga_60.s01 1
xga_60.c01 1
xga_60.c02 1
xga_60.c03 1
----------------------------
Active file : xga_60.c04
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 5-13
15052003
TM
resolution
1024x768
1024x760
1024x760
1024x760
5. Random Access
43