Preset Input Balance - Barco BARCOREALITY SIM 6 MK II + WARP 6 Owner's Manual

7. Service Mode

7.19 Preset Input Balance

Changing these settings may seriously affect the performance of the projector.
Start up
1. Push the cursor key ↑ or ↓ to highlight Preset Input Balance. (menu 7-63)
2. Press ENTER to select.
The following warning will be displayed : (menu 7-64)
Uniformity is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the Preset input balance
adjustments.
SERVICE
UNIFORMITY
ELECTRONIC CONVERGENCE
DYNACOLOR
GRAY LEVEL DEFINITION
PURITY
DISPLAY BLANKING
PANEL ADJUSTMENT
PRESET INPUT BALANCE
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-63
142
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 7-64
R5976496 BARCOREALITY SIM 6 MK II + WARP 6 15052003
TM