Picture Tuning; Starting Up Picture Tuning - Barco BARCOREALITY SIM 6 MK II + WARP 6 Owner's Manual

Serial File Load
1. Push the cursor key ↑ or ↓ to highlight Serial File Load. (menu 5-25)
2. Press ENTER to toggle between [OFF] or [ON].
This Serial File Load setting is default set to [OFF].
[OFF] The Serial File Load command is set to off.
[ON] The projector is forced to load a file through RS232, all other means to load a file are disabled until Serial File
Load is set to off.
FILE OPTIONS
FILE SORT [NAME]
FILE LOAD [AUTOMATIC]
SERIAL FILE LOAD [OFF]
FIELD STRETCH [OFF]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-25
Field Stretch (Optional)
1. Push the cursor key ↑ or ↓ to highlight Field Stretch.
Note: The Field Stretch menu item will be greyed out when this option is not installed.
2. Press ENTER to toggle between [OFF] or [ON].
Note: The field stretch functionality compensates for the lack off bandwidth on some older IG's.
Complicated source content will result in long render times, the field stretch option will give the IG extra time to render
the source content, before sending the next source field.
According to the complexity of the content, this extra time will vary in time, resulting in a variable vertical field time.
The projector's field stretch option allows the projector to deal with 'field stretch' source content.
This Field Stretch setting is default set to [OFF].
[OFF] Field Stretch is set to off.
[ON] Field Stretch is set to on, when available on the IG, this will allow the projector to receive 'field stretch' source
content.

5.4 Picture Tuning

5.4.1

Starting up Picture Tuning

How to start up ?
1. Push the cursor key ↑ or ↓ to highlight Picture Tuning. (menu 5-26)
2. Press ENTER to select.
The Picture Tuning menu will be displayed. (menu 5-27)
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
AUDIO TUNING
GEOMETRY
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-26
R5976496 BARCOREALITY SIM 6 MK II + WARP 6
PICTURE TUNING
MOTION COMPENSATION
COLOR TEMPERATURE
GAMMA
INPUT BALANCE
WINDOWING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-27
15052003
TM
5. Random Access
47