Table of Contents
Advertisement
3. Connections
How to connect to Input 1?
1. Connect the Output of the Image Generator to the 5–Cable BNC Input (Input 1) on the projector. (image 3-5)
VIDEO
R
G
Image 3-5
Connecting to Input 1
How to select Input 1?
1. Press key 1 on the RCU or the local keypad.
Configuring the 5 cable input
This configuration has to be done on the Input Slot menu. To change the signal format:
1. Press the ADJUST or ENTER key to start up the Adjustment mode.
The Adjustment Mode menu will be displayed. (menu 3-8)
2. Push the cursor key ↑ or ↓ to highlight Installation. (menu 3-9)
3. Press ENTER to select.
The Installation will be displayed.
4. Push the cursor key ↑ or ↓ to to highlight Input Slots. (menu 3-10)
5. Press ENTER to select.
The projector will scan the inputs and will display the results in the Input Slots menu. (menu 3-11)
6. Push the cursor key ↑ or ↓ to select the first slot. (menu 3-12)
18
3
4
S-VIDEO
SDI
5
IEEE 1394
SDO
1
COMPUTER
B
H/C
V
6
10/100 Base-T
RS232 IN
MOUSE
2
MONITOR
AUDIO IN
A
AUDIO IN
Image Generator
R5976496 BARCOREALITY SIM 6 MK II + WARP 6
RC
RS232 OUT
COMM. PORT
B
AUDIO IN
C
AUDIO IN
15052003
TM
Advertisement
Table of Contents
