Barco BARCOREALITY SIM 6 MK II + WARP 6 Owner's Manual page 76

5. Random Access
By pressing the * key on the RCU an internal hatch pattern is projected instead of the image data.
How to perform a coarse linearity adjustment by using the Side Bows?
We assume side bow top is selected.
1. Push the cursor key ↑ or ↓ to select pixel x = 0 in the Geometry Distortion menu. (menu 5-71)
2. Push the cursor key ← or → to coarse shift the selected Side Bow in a horizontal way.
3. Repeat step 1 to 2 for the Coarse side bow bottom selection.
This will shift the vertical center line, resulting in a coarse horizontal linearity adjustment (Follow this procedure in a similar way
to shift the horizontal center line). (image 5-23)
4. Use the subpixel adjustments to fine shift the selected Side Bows.
5. Continue with the Coarse Center adjustment or press EXIT to return to the Guided Geometry Map menu.
GEOMETRY DISTORTION
side bow top
col = 4
row = 0
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 5-71
Image 5-23
Using side bows to perform a coarse linearity adjustment
72 R5976496 BARCOREALITY SIM 6 MK II + WARP 6 15052003
TM