Keypad Options - NAPCO Gemini GEM-P816 Programming Instructions Manual

KEYPAD OPTI ON S (A DDRES S 1425-1431, 1440-144 6)
Enable Keypad Type
& Activation
Keypad 1
Keypad 2
Keypad 3
Keypad 4
Keypad 5
Keypad 6
Keypad 7
Enable Keypad Options
Keypad 1 Options
Keypad 2 Options
Keypad 3 Options
Keypad 4 Options
Keypad 5 Options
Keypad 6 Options
Keypad 7 Options
[Default = blank (•) from address 1440-1446]
ENABLE KEYPAD OPTIONS: Select options for any of the 7 keypads.
1. Select the desired option entering the option number (1-8) for each digit.
2. At the keypad, enter corresponding option number in address location.
NOTE: Dark shaded data value box shows option not available.
U
3. Press to save.
NAPCO Security Systems
R
Enable Keypad Type
Blank (•) = Burg Keypad
2 = Wizard
ADDR
‡
Not for UL Installations
1425
1426
1427
1428
1429
1430
1431
[Default = blank (•) from address 1425-1431
Keypad Keypad
ADDR
Fire Aux.
1
1440
1441
1442
1443
1444
1445
1446
‡
NOTE: Keypad Aux. is not to be selected for UL Installations.
Keypad Area Assignment
Blank (•) = Disabled
1 = Area 1
‡
Enable Keypad Options
Keypad
RSRVD Ambush
Panic
‡
2 3 4
GEM-P816 Programming Instructions
KEYPAD TYPE:
pads may be programmed, if
they are connected.
NOTE: See Keypad Configura-
tion Mode.
1. Select keypad type for each
keypad from
shown.
2. Enter data in corresponding
address locations.
U
3. Press to save.
Easy Panel
RSRVD
Arming Access
5 6 7
Page 27
Up to 7 key-
the tables
8