Cs Receiver Options - NAPCO Gemini GEM-P816 Programming Instructions Manual

Page 20
ADDRESS 0460
CS Receiver 1
Format
Default for CS Receiver 1 Format depends on Easy Menu Question "RCVR FORMAT". [Default = •(blank) •
(blank)] for CS Receivers 2 and 3 Formats.
CS RECEIVER FORMATS: Up to 3 CS Formats may be programmed.
1. Select the desired CS Receiver Format from the table shown.
2. Enter the corresponding digit in the address location for each CS Receiver.
shaded data value box shows option not available. Press [Enter] to save.
0461 CS Receiver Options - Telco 1
Option
Default
OFF 1
OFF 2
Enable Zone Number on Pulse Alarm
OFF 3
OFF 4
OFF
5
OFF 6
OFF
7
OFF
8
CS Receiver Options - Telco 3
0505
Option
Default
OFF 1
OFF 2
Enable Zone Number on Pulse Alarm
OFF 3
OFF 4
OFF
5
OFF
6
OFF
7
OFF
8
CS Receiver 1
Telephone
0462 0463 0464 0465 0466 0467 0468 0469 0470 0471 0472 0473 0474 0475 0476 0477 0478 0479 0480 0481
Number
(Digits 1-20)
CS Receiver 2
Telephone
0484 0485 0486 0487 0488 0489 0490 0491 0492 0493 0494 0495 0496 0497 0498 0499 0500 0501 0502 0503
Number
(Digits 1-20)
CS Receiver 3
Telephone
0506 0507 0508 0509 0510 0511 0512 0513 0514 0515 0516 0517 0518 0519 0520 0521 0522 0523 0524 0525
Number
(Digits 1-20)
CS RECEIVER TELEPHONE NUMBERS: Enter telephone numbers for any of the three CS Receivers (Telco 1, 2 & 3).
1. Enter digit only.
2. Enter up to 20 digits from left to right. NOTE: Leave trailing boxes blank (•). Press [Enter] to save.
3. Valid entries are: 1-9, B =
GEM-P816 Programming Instructions
CS RECEIVER OPTI ONS (ADDRE SS 0460-0 525)
ADDRESS 0482
CS Receiver 2
Format
1400Hz Handshake/Kissoff *
2300Hz Handshake/Kissoff *
Single Digit Only
Sum Check
3/1 with Extended Restores
Enable TCP/IP AES RPT
RESERVED
1400Hz Handshake/Kissoff *
2300Hz Handshake/Kissoff *
Single Digit Only
Sum Check
3/1 with Extended Restores
Enable TCP/IP AES RPT
RESERVED
ADDRESS 0462-0481 (RIGHT DIGITS 1-20)
ADDRESS 0484-0503 (RIGHT DIGITS 1-20)
ADDRESS 0506-0525 (RIGHT DIGITS 1-20)
* #
button, C = button, D = 3 sec. pause, E = Wait for dial tone, F = Ignore location
ADDRESS 0504
CS Receiver 3
Format
NOTE: Dark
CS Receiver Options - Telco 2
0483
Option
Default
OFF 1
OFF 2
OFF 3
OFF 4
OFF
5
OFF 6
OFF
7
OFF
8

CS RECEIVER OPTIONS:

Select options for any of the three CS Receivers.
1. Select the desired option entering the option number
(1-8) for each digit.
2. Enter corresponding option number in address
location (right nibble).
NOTE: Dark shaded data value box shows option not avail-
able. Press [Enter] to save.
*NOTE: If both are selected, 1400Hz has priority over 2300Hz.
DATA CS RECEIVER 1 FORMAT
ENTRY
(•) Ademco Slow, Silent Knight Slow
blank
2 Radionics Fast
3 Silent Knight Fast
4 Radionics, DCI, Franklin Slow
5 Universal High Speed
B SIA
C Ademco Point ID
E Pager *
NOTE: * See Pager Format Options to program
Leading Digits for Pager Format.
1400Hz Handshake/Kissoff *
2300Hz Handshake/Kissoff *
Enable Zone Number on Pulse Alarm
Single Digit Only
Sum Check
3/1 with Extended Restores
Enable TCP/IP AES RPT
RESERVED
Default
Receiver 1 Tele-
phone
depends on Easy
Menu
" C E N T R A L
PHONE #".
[Default = blank (•)]
across digits 1-20
for
Telephone
bers 2 and 3.
NAPCO Security Systems
R
for CS
Number
Question
CS Receiver
Num-