Keypad Options (Addr 0723-0736) - NAPCO Gemini GEM-P816 Programming Instructions Manual

WI995C 2/04
KEYPAD OPTI ON S (ADDRESS 0723-0 736 & 1055-1058)
Enable Keypad Type
& Activation
Keypad 1
Keypad 2
Keypad 3
Keypad 4
Keypad 5
Keypad 6
Keypad 7
Enable Keypad Options
Keypad 1 Options
Keypad 2 Options
Keypad 3 Options
Keypad 4 Options
Keypad 5 Options
Keypad 6 Options
Keypad 7 Options
[Default = blank (•) from address 0730-0736]
ENABLE KEYPAD OPTIONS: Select options for any of the 7 keypads.
!
1. Select the desired option entering the option number (1-8) for each digit.
!
2. At the keypad, enter corresponding option number in address location.
NOTE: Dark shaded data value box shows option not available.
U D
!
3. Press or to save.
L
NAPCO Security Systems
KEYPAD OPTI ON S (ADDRESS 0723-0 736)
Enable Keypad Type
Blank (•) = Burg Keypad
2 = Wizard *
ADDR
* N o t f o r U L I n s t a l l a t i o n s .
0723
0724
0725
0726
0727
0728
0729
Keypad
Keypad
ADDR
Fire
Aux.
1
0730
0731
0732
0733
0734
0735
0736
Keypad Area Assignment
Blank (•) = Disabled
1 = Area 1
2 = Area 2
Enable Keypad Options
Keypad
RSRVD Ambush
*
Panic
2 3 4
*
NOTE: Keypad Aux. is not to be selected for UL Installations.
X
GEM-P816 Programming Instructions
Page 25
KEYPAD TYPE: Up to 7 key-
pads may be programmed, if
they are connected.
NOTE: See Keypad Configura-
tion Mode. By default from the
factory, each keypad is config-
ured as number 1.
1. Select keypad type for each
keypad from
shown.
2. Enter data in corresponding
address locations.
U D
3. Press or
Easy Panel
RSRVD
Arming Access
5 6 7
!
the tables
to save.
8