Cs System Reporting Options; Cs Area & System Reporting Options - NAPCO Gemini GEM-P816 Programming Instructions Manual

Page 22
CS SYS TEM RE P ORTIN G OPT ION S (ADDRES S 0670-0705)
ADDRESS 0670-0682
CS SYSTEM
REPORTING CODES
Alarm Restore blank (•)
Trouble
blank (•)
Trouble Restore
blank (•)
Xmitter Low Battery
blank (•)
Xmitter Supervision
blank (•)
Xmitter Tamper
blank (•)
RESERVED
blank (•)
Opening
blank (•)
Closing
blank (•)
Opening after Alarm
blank (•)
Conditional Close
blank (•)
Cancel
blank (•)
Test Timer
[Default = blank (•) blank (•) from address 0670-0682]
[Default = blank (•) blank (•) from address 0683-0705]
CS AREA & SYS TEM RE POR TIN G OP TION S (ADD RESS 078 5, 07 86 & 0 788 )
DISABLE OPENING REPORTS
ADDRESS 0785
LEFT DIGIT RIGHT DIGIT (SUM
OF DATA VALUES)
blank (•)
[Default = blank (•) blank (•)]
OPENING REPORT OPTIONS:
1. Select the desired option by circling
2. Add the data values (ex: F=15=(1+2+4+8) from the selected options. See page 13).
3. Enter in address location (left and right digits).
NOTE: Dark shaded data value box shows option not available. Press
CS System Report Options
0788
Option
Default
1
OFF
2
OFF
3
OFF Touch-tone Dialing w/Rotary Backup *
4
OFF
OFF 5
Cancel Next Test Timer on any Report
OFF 6
Disable Wait for Silence (Pager Format)
OFF 7
Disable Wait for Handshake on Transmit
OFF 8
GEM-P816 Programming Instructions
CS SYSTEM
REPORTING CODES
ADDR
0670 Telco Fail
RF Rec. Trouble
0671
0672
Memory Fail
0673 Low Battery
0674
Panel AC Fail
0675
EZM Tamper
0676 blank (•)
Alarm Output Superv.
0677 Ambush
0678
Panic
0679
Fire
0680
Auxiliary
0681
Tamper
0682
Fail to Open
Fail to Close
Keyfob Low Battery
RIGHT DATA
VALUES AREA
)
(CIRCLE
AREA 1
1
2
4
8
the data values for each digit (left and right).
Backup Report on Telco 1 & 2
Touch-tone Dialing Only *
RESERVED
Disable Auto Dial Tone Detect
ADDRESS 0683-0708
ADDR
0683
0684
0685
0686
0687
0688
0689
0698
0699
0700
‡
0701
0702
0703
0704
0705
DISABLE CLOSING REPORTS
ADDRESS 0786
LEFT DIGIT RIGHT DIGIT (SUM
OF DATA VALUES)
blank (•)
[Default = blank (•) blank (•)]
U
to save.

CS SYSTEM REPORTING OPTIONS:

1. Select the desired option entering the
option number (1-8) for each digit.
2. Enter corresponding option number in
address location.
NOTE: Dark shaded data value box shows op-
tion not available.
U
3. Press to save.
* NOTE: If neither Touch-tone Dialing nor Touch-tone w/Rotary
Backup is selected, then system defaults automatically to Rotary
Dialing. Leave blank (•) to select Rotary Dialing.
CS SYSTEM REPORTING CODES:
1. Enter in corresponding address loca-
tion (left and right digits).
NOTE: Left digit is the first digit and
right digit is the second digit in a two
digit CS receiver format.
2. Valid entries are: 1-9, 0 and B-F.
NOTE: A is not permitted.
3. To disable a code leave boxes blank
(•).
NOTE: Dark shaded data value box
shows option not available.
U
4. Press to save.
‡
NOTE: Keypad Aux. is not to be selected for
UL Installations.
RIGHT DATA
VALUES
(CIRCLE
1
2
4
8
NAPCO Security Systems
R
AREA
)
AREA 1