HP ProCurve 520wl User Manual page 55

Advanced Configuration
Figure 4-6 1 Mbits/s and 11 Mbits/s Multicast Rates
NOTE
There is an inter-dependent relationship between the Distance between APs and the Multicast Rate. In
general, larger systems operate at a lower average transmit rate. The variation between Multicast Rate and
Distance Between APs is presented in the following table:
1.0 Mbit/s
Large
Medium
Small
Minicell
Microcell
The Distance Between APs must be set before the Multicast Rate, because when you select the Distance
Between APs, the appropriate range of Multicast values automatically populates the drop-down menu. This
feature is only available when using an HP ProCurve Wireless 802.11b AP Card 150wl.
2.0 Mbits/s 5.5 Mbits/s
yes yes
yes yes yes
yes yes yes
yes yes yes
yes yes yes
11 Mbits/s
yes
yes
yes
4-13