Command Line Interface (CLI)
Proxy ARP Parameters
Name
Proxy ARP
Status
IP ARP Filtering Parameters
Name
IP ARP Filtering
Status
IP Address
Subnet Mask
Broadcast Filtering Table
Name
Broadcast Filtering
Table
Index
Protocol Name
Direction
Status
TCP/UDP Port Filtering
The following parameters are used to enable/disable the Port filter feature.
Name
Port Filtering
Port Filter Status
TCP/UDP Port Filtering Table
The following parameters are used to configure TCP/UDP Port filters.
Name
Port Filtering Table
Table Index
Port Type
Type
Values
Group
N/A
Integer
enable
disable (default)
Type
Values
Group
N/A
Integer
enable
disable (default)
IpAddress
User Defined
IpAddress
User Defined
Type
Values
Table
N/A
Integer
1-5
DisplayString
N/A
Integer
ethertowireless
wirelesstoether
both (default)
Integer
enable
disable (default)
Type
Values
Group
N/A
Integer
enable (default)
disable
Type
Values
Table
N/A
N/A
User Defined
(there are also 4
pre-defined indices, see
Port Number
more information)
Octet String
tcp
udp
tcp/udp
Access
CLI Parameter
R
parp
RW
parpstatus
Access
CLI Parameter
R
iparp
RW
iparpfltstatus
RW
iparpfltipaddr
RW
iparpfltsubmask
Access
CLI Parameter
R
broadcastflttbl
N/A
index
R
protoname
RW
direction
RW
status
Access
CLI
R
portflt
RW
portfltstatus
Access
CLI
R
portflttbl
R
index
below for
RW
porttype
C-37