Table of Contents
Advertisement
Getting Started
10. Connect one end of an Ethernet cable to the AP's Ethernet port. The other end of the cable should not be
connected to any other device until after the installation is complete.
•
Use a straight-through Ethernet cable to connect the AP to a hub, switch, or patch panel.
•
Use a cross-over Ethernet cable to connect to a single computer.
11. Configure and test the unit. See
12. Download the latest software to the unit, if necessary. HP provides access point software updates through the HP
ProCurve website at http://www.hp.com/go/hpprocurve. See
Initialization
for details.
Download the Latest Software
for details.
2-5
Advertisement
Table of Contents
