HP ProCurve 520wl User Manual page 172

Command Line Interface (CLI)
Filtering Parameters
Ethernet Protocol Filtering Parameters
Name
Ethernet Filtering
Filtering Interface
Bitmask
Operation Type
Ethernet Filtering Table
Identify the different filters by using the table index.
Name
Ethernet Filtering Table
Table Index
Protocol Number
Protocol Name (optional) DisplayString
Status (optional)
NOTE �
The filter Operation Type (passthru or block) applies only to the protocol filters that are enabled in this table.
Static MAC Address Filter Table
Name
Static MAC Address
Filter Table
Table Index
Static MAC Address on
Wired Network
Static MAC Address
Mask on Wired Network
Static MAC Address on
Wireless Network
Static MAC Address
Mask on Wireless
Network
Comment (optional)
Status (optional)
Type Values
Group N/A
Interface Bitmask 0 or 2 - no interfaces
(disable)
1 or 3 - Ethernet
4 or 6 - Wireless A
8 or 10 - Wireless B
12 = Wireless A & B
13 or 15 - all interfaces
(default is 15)
passthru
block
Type Values
Table N/A
N/A N/A
Octet String N/A
Integer enable (1)
disable (2)
delete (3)
Type Values
Table N/A
N/A N/A
PhysAddress User Defined
PhysAddress User Defined
PhysAddress User Defined
PhysAddress User Defined
DisplayString max 255 characters
Integer enable (default)
disable
delete
Access CLI Parameter
R etherflt
RW etherfltifbitmask
RW etherfltoptype
Access CLI Parameter
R etherflttbl
R index
RW protonumber
RW protoname
RW status
Access CLI Parameter
R staticmactbl
R index
RW wiredmacaddr
RW wiredmask
RW wirelessmacaddr
RW wirelessmask
RW cmt
RW status
C-36