HP ProCurve 520wl User Manual page 23

Feature
Closed System
Interference Robustness
1
Load Balancing
1
AP List
SpectraLink VoIP Support
Blocking Intra BSS Clients
Packet Forwarding
TCP/UDP Port Filtering
Dynamic Frequency Selection
Per User Per Session Encryption
Syslog Messaging
Turbo Mode
Monitoring Station Statistics
Secure Socket Layer (SSL)
Rogue AP Detection Support
TX Power Control
Auto Configuration
Multiple Authentication Server Support
Dynamic Domain Name Service (DDNS)
AP System Naming Convention
WiFi Protected Access (WPA)
1
This feature is only available when using an HP ProCurve Wireless 802.11b AP Card 150WL. In addition, this feature
will only give information for ORiNOCO/Agere/Lucent based clients.
2
WPA is supported only in the HP ProCurve Wireless 802.11g AP Card 170WL.
2.4 GHz 2.4 GHz 5 GHz
(802.11b) (802.11g) (802.11a)
yes yes
yes no
yes no
yes no
yes no
yes yes
yes yes
yes yes
N/A N/A
no yes
yes no
no no
yes yes
yes yes
no yes
no yes
yes yes
yes yes
yes yes
yes yes
no yes
Comments
yes
no
no
no No client support for 802.11a
no
yes
yes
yes
yes A user cannot manually select a channel for products
sold in Europe; these products require automatic channel
selection using Dynamic Frequency Selection (DFS).
yes In conjunction with 802.1x or WPA
yes
yes Turbo mode provides twice the data rate of standard
802.11a mode; not available in all countries.
yes
yes
yes
no
yes
yes
yes
yes
no
2
1-5