Table of Contents
Advertisement
Recall
Create a Conference Call
38DHB0002UKCK - Issue 4 (07/00)
Your phone system may connect to another phone system by a fixed
line (tie line). If this is the case, you may occasionally need to use a
'recall' (your System Manager will advise).
To dial a recall:
1. Press FEATURE, 6, .
During a call, you can add callers to create a conference (of up to 64
calls!). If your exchange uses digital lines, you can conference
several of these. However, if your exchange uses any other types of
line, you can only include one of those in a conference. Check with
your System Manager.
To start a conference or add to a conference:
1. Press HOLD to hold your current call (or conference).
2. Dial the number of the person you want to join the call.
3. If answered, ask if they wish to join a conference.
• If "yes", press FEATURE, 5.
• If "no", press HOLD.
4. If unanswered, press HOLD to return to the first call.
To exit the conference:
1. Press ANSWER RELEASE. If only two callers remain, the
conference becomes a normal call.
To park all the conference parties: (see page 17)
1. Press FEATURE, 7, .
To split a 3-way conference:
1. Press FEATURE 6, 1 to hold one caller and connect the other.
2. To switch between parties, press HOLD.
Actions During a Call – Page 13
INDeX 9.1 2010 User Guide
Advertisement
Table of Contents
