Lucent Technologies INDeX 2010 User Manual page 16

Page 16 - Answering Calls
Answering Other Extensions - Call Pickup
INDeX 9.1 2010 User Guide
You can pickup an incoming external call to any ringing extension. In
addition, your INDeX 2010 can store a pickup group number (see
below). You can then pick up external calls ringing any phone in the
group.
To pick up any ringing phone:
1. Press ANSWER RELEASE, press FEATURE 9 and dial the
extension number of the ringing phone.
2. Lift the handset or continue handsfree.
To pick up any ringing phone in a group:
1. Without lifting the handset, press FEATURE, 9 and ANSWER
RELEASE to pickup the longest ringing call in the group.
2. Lift the handset or continue handsfree.
To set the 2010's pickup group:
1. Without lifting the handset, press FEATURE, .
2. Short-chirp: Dial 4, 2 (pickup group).
3. Double-tone: Dial the your passcode (if you make a mistake dial
to restart entry). You will then hear either :-
• Deep double-ring: Passcode not recognised.
Dial the passcode again or press FEATURE to stop.
• Double-ring: The 2010 has a pickup number set.
Either dial to cancel it or press FEATURE to stop.
• Single-ring: The 2010 has no pickup number set.
Press FEATURE to stop or dial a new group number and then #.
You will then hear either :-
• Deep double-ring: Number entered invalid.
Press FEATURE to stop or dial a new number and then #
again.
• Short-chirp: Number setup.
Either select another feature or press FEATURE to finish.
38DHB0002UKCK - Issue 4 (07/00)