Making Calls; Call Barring; Making External Calls - Lucent Technologies INDeX 2010 User Manual

Page 6 - Making Calls

Making Calls

Notes on Making Calls

Call Barring

Making External Calls

INDeX 9.1 2010 User Guide
Your INDeX 2010 phone allows very simple and quick dialling to
make calls. To simplify dialling, the system also stores several
hundred speed dials for use by any extension (see page 8). You can
also store your own frequently needed numbers as speed dials.
The system can bar you from dialling particular numbers or types of
numbers, e.g. national and international. Typically call barring
increases when the system puts the phone's area into night service.
Call barring can also change according to time, date and day of the
week. As the call barring settings vary for each site, this guide cannot
fully detail their effect.
The system may apply call barring to some or all external numbers
(see Call Barring). You can also lock your INDeX 2010 (see page 24)
or bar it by wrong passcode entry (see page 23).
To dial an external call:
1. Dial 9 (Your System Manager will inform you if you need to dial a
different number).
2. If the 2010 gives three tones, it requires either a PIN or account
code before allowing the call.
3. Dial the external telephone number.
4. When answered, either pickup the handset or continue the call
handsfree.
5. During the call you can:
6. Park, hold or transfer the call (see page 17).
7. Perform various other actions (see page 12).
8. To end, press ANSWER RELEASE or replace the handset.
To redial the last external number used:
1. Press REDIAL to repeat the last external number used (including
speed dials).
38DHB0002UKCK - Issue 4 (07/00)