Resetting The Base Station To The Factory Setting - Siemens gigaset 4010 Operating Instructions Manual

Base station settings
Press keys:
Base Settings
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Base Reset
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
68
Resetting the base station to the factory
setting
) Resetting the base station does not affect the system
PIN or handset registration.
Open the menu.
Select the menu item and confirm.
Select the menu item and confirm.
PIN Enter the PIN and confirm
(factory setting 0000).
<(6
Confirm resetting after the check prompt.
Function
Preselection (see page 35)
Caller list (see page 30)
Barge in on a call (see page 55)
Internal names of the handsets
(see page 52)
Alarm clock (see page 12)
Dialling mode (see page 71)
Flash time (see page 71)
Prefix (APL) (see page 72)
Pause after prefix (APL), (see
page 73)
Pause after R (see page 73)
Pause after line seizure (see
page 73)
SMS provider number (see
page 45)
SMS incoming lists and outgoing
lists (see page 41)
Factory setting
deleted
deleted
Deactivated
INT 1 - INT 6
Deactivated
MFV
250 ms
deleted
3 s
800 ms
3 s
Deactivated
deleted