Stopwatch; Countdown; Voice Command - Siemens MC60 Operating Instructions Manual

48 Extras

Stopwatch

¢ y ¢
§Menu§
Two intermediate times can be
recorded and saved.
Start/stop.
#
Intermediate time.
*
Start stopwatch.
§Start§
Reset.
§Reset§

Countdown

¢ y ¢
§Menu§
A set time elapses. The last
3 seconds are indicated by a beep.
At the end a special beep sounds.
Set period of time.
§Set§
Start counter.
§Start§
§Stop§ Interrupt counter.
Change period of time.
§Change§
Set to start time.
§Reset§
Stopwatch
Countdown

Voice command

¢ y ¢
§Menu§
Functions can be started by a voice
command. Up to 20 voice recordings
can be saved in the phone for voice
dialling or voice commands (not on
SIM card!).
Record
A list of the available functions is
displayed.
Select a function.
G
Press.
§Record§
Confirm selected
§Yes§
function.
§Start§ Start recording.
A short signal sounds. Now say the
command corresponding to the
function and repeat it when
prompted.
Apply
Press down (in standby
G
mode).
A short signal (beep) sounds and a
prompt appears in the display.
Now say the function.
Noisy environments may affect voice
recognition.
Voice command