Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
Figure 2-8
Figure 2-8 Installing an omnidirectional outdoor antenna
Omnidirectional
outdoor antenna
Antenna pole
2.7 Installing the Security Lock
There is a security slot on the AP. You can lock the AP to an immovable object to prevent the
AP against theft. The detailed procedures are as follows:
1.
2.
Issue 02 (2014-12-05)
rod between two omnidirectional antenna poles. Adjust the height of the lightning rod to
ensure that the omnidirectional antennas are covered in the protection angle.
shows installation of an omnidirectional outdoor antenna.
Protection
angle
>1.0m
Hose clamp
NOTE
If antennas are installed on a metal pole such as a steel pole, you do not need to install a lightening rod, as
shown on the right in
Figure
Fasten the cable of the security lock to an immovable object around.
Insert the security lock into the security slot and lock it.
Lock hole
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Lightning rod
2-8.
Security lock
2 AP Installation
33