Replacing The Mold Of The Crimping Pliers - Huawei AP8030DN Installation And Maintenance Manual

Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
Figure 5-71 Disassembling an MPO fiber connector
----End

5.1.5 Replacing the Mold of the Crimping Pliers

Procedure
Step 1 Hold the handles of a pair of COAX crimping tools. Loosen the two fastening screws in the
counterclockwise direction, as shown in
Figure 5-72 Loosening two fastening screws
Step 2 Hold the handles of the COAX crimping tools to open the self-locking mechanism. The jaw of
the COAX crimping tools opens automatically, as shown in
Issue 02 (2014-12-05) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-72.
Figure
5 Appendix
5-73.
83