Checking The Ap After Installation; Powering On The Ap - Huawei AP8030DN Installation And Maintenance Manual

Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
You need to purchase the security lock separately.

2.8 Checking the AP After Installation

Table 2-4
Table 2-4 AP installation checklist
No.
1
2
3
4
5
6
7
8
9
10

2.9 Powering on the AP

After the AP installation is complete, observe indicators on the AP to determine the system
running status. For details, see
Do not frequently power on and off an AP.
Issue 02 (2014-12-05)
NOTE
shows the items to be checked after AP installation is complete.
Check Item
The AP is installed by strictly following the design draft. The installation
position meets space requirements, with maintenance space reserved.
The AP is securely installed.
Waterproof caps are installed on idle interfaces and securely fastened.
The power cables and PGND cables are intact and not spliced.
Terminals of the power cables and PGND cables are welded or cramped
firmly.
All power cables or PGND cables are not short-circuited or reversely
connected and must be intact with no damage.
The power cables and ground cables are separated from other cables and
bundled separately.
The working ground, protection ground, and surge protection ground share
the same group of ground bars.
Connectors of signal cables are complete, intact, and tightly connected.
The signal cables are not damaged or broken.
Labels on cables, feeders, or jumpers are clear and correct.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1.2 Indicator Description.
2 AP Installation
34