Huawei AP8030DN Installation And Maintenance Manual page 11

Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
Type
Alarm
Fault
Link/ACT indicators
Link/ACT indicators consist of Link/ACT0, Link/ACT1, and Link/ACT2, showing link status
of interfaces GE0/PoE, GE1, SFP respectively.
Table 1-3 Descriptions about the Link/ACT indicators
Type
LINK
ACT
Wireless indicators
Wireless indicators consist of Wireless0 and Wireless1, showing wireless link status of the 5
GHz and 2.4/5 GHz radio interfaces respectively.
Issue 02 (2014-12-05)
Color Status
Blinking
once every
5s (0.2 Hz)
Green Blinking
once every
0.25s (4
Hz)
Red Steady on
Color Status
Green Steady on
Green Blinking
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AP8130DN & AP8030DN Overview
Description
The system is running properly, the Ethernet
connection is normal, and no STA is associated with
the AP. The system is in low power consumption
state.
l The software is being upgraded.
l After the software is uploaded and started, the AP
working in Fit AP mode requests to go online on
the AC and maintains this state until it goes
online successfully on the AC (before the
CAPWAP link is established).
l The AP working in Fit AP mode fails to go online
on the AC (the CAPWAP link disconnects).
A fault that affects services has occurred, such as a
DRAM detection failure or system software loading
failure. The fault cannot be automatically rectified
and must be rectified manually.
Description
The system is running properly, the Ethernet
connection is normal, and no data is being
transmitted.
The system is running properly, the Ethernet
connection is normal, and the AP is transmitting
data. The indicator blinks more quickly when more
data is being transmitted.
5