Aaeon MB-562 Manual page 74

These drivers are designed to work with Microsoft
1. Install WindowsÔ NT 3.51 as you normally would for a VGA
display. Run WindowsÔ NT Control Panel from the Main Group.
Choose the Display option. In the Display Settings dialog box,
click on Change Display Type. Click on Change from the
Adapter Type in the Display Type dialog box. Click on Other in
the Select Device dialog box.
2. Place the WindowsÔ NT Display Driver Diskette in drive A.
Press <ENTER> and the following driver names will appear
highlighted in the Models list box:
CHIPS Video Accelerator (64310, 65545, 65548, 65550)
CHIPS Video Accelerator (65510, 65530, 65535, 65540)
Click on Install to Install the selected driver. Once the instal-
lation is complete, shutdown and restart the system.
3. Upon restart, at the Invalid Display Selection message, click on
OK and select the desired display settings from the Display
Settings dialog box. Click on Test to test the newly selected
graphic mode. A color test screen should appear, followed by the
Testing Mode window. Click on Yes to continue. The Display
Settings Change window will appear. Click on Restart Now for the
new settings to take effect.
6 6 MB-562 User's Manual
Ô Ô Ô Ô Ô
Ô Ô Ô Ô Ô
Ò
WindowsÔ .