Table of Contents
Advertisement
4. When running WIN-OS/2, DO NOT use <ALT>+<HOME> to
switch a DOS or OS/2 Full Screen session to Windows. If this
happens, do a system shutdown and reboot.
Driver diskette copy
NOTE:
Diskette copies of the OS/2 drivers must have a
VOLUME LABEL that reads "DISP 1" in order to be an
installable diskette.
To copy the OS/2 Display Driver Diskette, follow these instructions:
1. Copy all files on the OS/2 Display Driver Diskette as you normally
would onto another diskette.
2. Place the diskette copy in drive A. At the C:\ prompt, type LABEL
A: DISP 1 to properly label your diskette. Then store your diskette
copy in a safe place.
For proper installation of OS/2 drivers, all diskette copies must be
properly labeled "DISP 1".
Chapter 5 Flat Panel/ CRT Controller
65
Advertisement
Table of Contents
