You can select the LCD shift clock mode by setting JP8. The following
charts show the available options.
LCD signal select (JP8)
SHF CLK from C&T65550*
ASHF CLK (inverted SHF CLK)
1
2 3
1 2
3
* Default
The mainboard can connect two LED indicators to show the status of
the communication link and traffic. The functions are showed as
follows:
A flashing LED indicates that the MB-562 is transmitting or receiving
data.
A continuously lit LED indicates good linkage between the MB-562
and its supporting hub.
Chapter 2 Installation 23