Aaeon MB-562 Manual page 61

If your floppy disk drive is the B drive, type B:, then press Enter.
4. Type "WINSTALL -a", and press Enter.
5. Follow the on-screen instructions to complete the installation.
To install the Audio Rack Application:
1. Insert Disk [SA31INST] into your floppy disk drive.
2. Launch the MS-DOS prompt.
3. At the C:\DOS prompt, type
A:
then press Enter.
If your floppy disk is the B, type B: instead of A:, then press Enter.
4. Type "WINSTALL", and press Enter.
5. Follow the on-screen instructions to complete the installation.
Chapter 4 Sound System 53