Aaeon MB-562 Manual page 50

The on-board Ethernet interface supports all major network
operating systems. I/O addresses and interrupts are easily
configured via the Award BIOS Setup. To configure the
medium type, to view the current configuration, or to run
diagnostics, please refer to the following instructions:
1. Power on and boot up the system.
2. Change the working drive and directory to where the
RSET8029.EXE file is located.
3. At the DOS prompt type RSET8029.EXE and press <Enter>.
The Ethernet configuration program will then be displayed.
4. This simple screen shows all the available options for the
Ethernet interface. Just highlight the option you wish to
change by using the Up and Down keys. To change a
selected item, press <Enter>, and a screen will appear with
the available options. Highlight your option and press
<Enter>. Each highlighted option has a helpful message
guide displayed at the bottom of the screen for additional
information.
5. After you have made your selections and the configuration
is what you want, press ESC. A prompt will appear asking
if you want to save the configuration. Press Y if you want
to save.
The Ethernet Setup Menu also offers three very useful diagnos-
tic functions. These are:
1. Run EEPROM test
2. Run Diagnostics on Board
3. Run Diagnostics on Network
Each option has its own display screen which shows the format
and result of any diagnostic tests undertaken.
42 MB-562 User's Manual