Ethernet Interface Model - Star TSP700II series Hardware Manual

11-4. Ethernet Interface Model

ON
OFF
No. 1 2 3 4 5 6 7 8
Switch
1-1 Command emulation (Ster Line mode)
1-2 Should not be changed (Should be set to on)
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Should not be changed (Should be set to on)
1-6 Handshaking conditions (conditions for
BUSY)
1-7 Should not be changed (Should be set to on)
1-8 Should not be changed (Should be set to on)
1-9 Low-power consumption mode
1-10 Should not be changed (Should be set to on)
The factory settings of DIP switch are all on.
Switch
2-1~2-4
The factory settings of DIP switch are all on.
9 10
DIP-SW 1
Function
Function
Always ON
ON
OFF
No. 1 2 3 4
DIP-SW 2
DIP-SW 1
Always ON
Invalid
Offline or receive
buffer full
Invalid
DIP-SW 2
– 47 –
ON
Valid
Receive buffer full
Valid
ON
Should be set to on
OFF
OFF