Star TSP700II series Hardware Manual page 28

(2) Recommended label paper
Product
Manufacturer
name
Lintec LD2114
Lintec LD5530
Ricoh 130LHB
Note:
1) Depending on the type and thickness of the paper, it may be necessary to change the
settings for printing darkness. To change the darkness settings, use the printing dark-
ness settings command <ESC><RS> 'd' n. Refer to the separate programmer's manual
for details.
2) The print density may vary depending on the type of paper roll, operating environment,
and power consumption mode.
3) A reader or scanner may not be able to scan a printed bar code or characters depending
on the print density. Make sure that your reader or scanner is able to scan correctly
beforehand.
(3) Effective Print Width
Paper Width Right / Left Margin (mm)
(mm)
76 ± 0.5 3
79 ± 0.5 3
Quality
features/
applications
For distribution
or information
control
For measurement
For distribution
or information
control
Effective Print Width
(mm)
70
73
– 24 –
Thickness (μm)
Base
Separator
material
65 41
85 65
85 –
Adhesion
Total
type
thickness
115 High
adhesion
150 High
adhesion
– High
adhesion
Number of Print Columns
(12 × 24 Font)
46
48