Full-Face Thermal Label Paper Roll - Star TSP700II series Hardware Manual

5-2. Full-Face Thermal Label Paper Roll

(1) Label paper specification
Backing paper width:
Outer roll diameter:
Take up paper roll width: 80
Thickness:
Core outer/inner diameter: core inner diameter ø25.4±1 mm/core outer diameter
Printed surface:
Tail end handling:
(2) Recommended label paper
Product
Manufacturer
name
Lintec LD2114
Lintec LD5530
Ricoh 130LHB
Note:
1) Depending on the type and thickness of the paper, it may be necessary to change the
settings for printing darkness. To change the darkness settings, use the printing dark-
ness settings command <ESC><RS> 'd' n. Refer to the separate programmer's manual
for details.
2) The print density may vary depending on the type of paper roll, operating environment,
and power consumption mode.
3) A reader or scanner may not be able to scan a printed bar code or characters depending
on the print density. Make sure that your reader or scanner is able to scan correctly
beforehand.
79.5±0.5 mm or 82.5±0.5 mm
ø100 mm or less
+0.5
mm or 83
-1
Max. 150 μm
ø32±1 mm
Outer edge of roll
Do not use paste or glue to secure the paper roll or its
core.
Do not fold the tail end of the paper.
Quality
features/
applications
For distribution
or information
control
For measurement
For distribution
or information
control
– 22 –
+0.5
mm
-1
Thickness (μm)
Base
Separator
material
65 41
85 65
85 –
Adhesion
Total
type
thickness
115 High
adhesion
150 High
adhesion
– High
adhesion