Wireless Lan Interface Model - Star TSP700II series Hardware Manual

Hide thumbs Also See for TSP700II series:

Table of Contents

Initializing Settings

■

Set the push switch as described below to initialize the

setting information.

Push the switch for one to five seconds while running

under normal operating mode. The green and red LEDs

will flash with a regular pattern. After that, push the

switch once again in that state to turn OFF both of the

red and green LEDs. This will return the settings of

the interface board to their default, or ex-factory, set-

tings. After the interface board has been initialized, the

printer will automatically reboot itself.

LED Display

■

Green :

Lights when other party connection is

recognized as 100BASE-TX.

Red :

Lights when packets are received.

11-5. Wireless LAN Interface Model

OFF

No. 1 2 3 4 5 6 7 8

Switch

1-1

Command emulation (Ster Line mode)

1-2