Contact; Safety; Intended Use; Personnel Qualifications - Alpha-InnoTec SWC V Series Operating Manual

1.4 Contact

Addresses for purchasing accessories, for service
cases or for answers to questions about the unit and
this operating manual can be found on the internet at
any time and is kept up-to-date:
● Germany: www.alpha-innotec.de
● EU: www.alpha-innotec.eu
2

Safety

Only use the unit if it is in proper technical condition
and only use it as intended, safely and aware of the
hazards, and follow this operating manual.

2.1 Intended use

The unit is solely intended for the following functions:
● Heating
● Domestic water heating (optional, with accesso-
ries)
● Cooling (optional, with accessories or unit type
...K3)
► Proper use includes
operating conditions ( "Technical data/Scope
of supply" on page 24) and the operating
manual and noting and following the reference
documents.
► When using the local regulations note: laws,
standards, guidelines, directives.
All other uses of the unit are not as intended.
2.2 Personnel qualifications
All instructional information in this operating manual
is solely directed at qualified, skilled personnel.
Only qualified, skilled personnel is able to carry out
the work on the unit safety and correctly. Interference
by unqualified personnel can cause life-threatening
injuries and damage to property.
► Ensure that the personnel is familiar with the
local regulations, especially those on safe and
hazard-aware working.
► O nly allow qualified personnel with "electrical"
training to carry out work on the electrics and
electronics.
► O nly allow qualified, skilled personnel to do any
other work on the system, e.g.
4
Subject to change without notice | 83057000bUK – Translation into English of the original German operating manual | ait-deutschland GmbH
complying with the
– Heating installer
– Plumbing installer
– Refrigeration system installer (maintenance
work)
During the warranty and guarantee period, service
work and repairs may only be carried out by
personnel authorised by the manufacturer.

2.3 Personal protective equipment

There is a risk of cutting your hands on sharp edges
of the unit.
► Wear cut-resistant protective gloves during
transport.
2.4 Residual risks
Electric shock
Components in the unit are live with life-threatening
voltage. Before opening the unit panelling:
► Disconnect unit from power supply.
► P rotect unit against being switched back on
again.
Injury due to flammable liquids and potentially
explosive atmospheres
Constituents of antifreeze mixtures, e.g. ethanol,
methanol, are highly flammable and form an
explosive atmosphere:
► mix antifreeze in well-ventilated rooms.
► N ote the hazardous substance markings and
comply with the relevant safety regulations.