About This Operating Manual; Validity; Reference Documents; Symbols And Identification Markings - Alpha-InnoTec SWC V Series Operating Manual

1

About this operating manual

This operating manual is part of the unit.
► B efore working on or with the unit read the
operating manual carefully and follow it for all
activities at all times, especially the warnings
and safety instructions.
► Keep the operating manual to hand at the unit
and hand over to the new owner if the unit
changes hands.
► If you have any questions or anything is unclear,
ask the local partner of the manufacturer or the
factory's customer service.
► Note and follow all reference documents.

1.1 Validity

This operating manual refers solely to the unit
identified by the nameplate and unit sticker
( "Rating plate" on page 6 and "Unit sticker" on
page 3).

1.2 Reference documents

The following documents
information to this operating manual:
● Planning & design manual, hydraulic integration
● Operating manual of the heating and heat pump
controller
● Brief description of the heat pump controller
● Operating manual of the expansion board
(accessories)
● Logbook, if included with this unit by the
manufacturer
Unit sticker
The unit sticker contains important information for
contact with the manufacturer or the local partner of
the manufacturer.
► Stick on the unit sticker (barcode with serial and
product number) here.
Subject to change without notice | 83057000bUK – Translation into English of the original German operating manual | ait-deutschland GmbH
contain additional
1.3 Symbols and identification
markings
Identification of warnings
Symbol Meaning
Safety-relevant information.
Warning of physical injuries.
DANGER Indicates imminent danger resulting
in serious injuries or death.
WARNING
Indicates a potentially dangerous
situation, which can result in serious
injuries or death.
CAUTION Indicates a potentially dangerous
situation, which can result in moder-
ate or minor injuries.
ATTENTION Indicates a potentially dangerous
situation, which can result in prop-
erty damage.
Symbols in the document
Symbol Meaning
Information for the professional
Information for the owner/operator
Requirement for an action

Single step action prompt

1., 2., 3. ... Numbered step within a multi-step
action prompt. Keep to the given
order.
Additional information, e.g. note
on easier work, information on
standards
Reference to further information

elsewhere in the operating manual
or in another document
3