SCAN Basic 5 Assembly And Instruction Manual
  1. Manuals
  2. Brands
  3. SCAN Manuals
  4. Stove
  5. Basic 5
  6. Assembly and instruction manual

SCAN Basic 5 Assembly And Instruction Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

A S S E M B LY- A N D I N S T R U C T I O N S M A N U A L
Scan
Basic 5
Congratulations on the purchase of your new Scan stove
You have purchased a product by one of Europe's leading manufacturers of stoves, and we are sure that you will have years of
pleasure with your purchase. To make the best possible use of your stove, it is important that you follow the advice and instruc-
tions in this manual.
Please read the assembly instructions and instructions for use before you start to assemble your stove.
Make a note of your stove's pro-
duct registration number here so
that you have it available if you
need to contact us.
Approved according to
The EC declaration of conformity is available from www.krog-iversen.dk
Content
The Product
Product registration number
Installation
Adapter between top outlet and steel flue
valve
EN 13240
Version GB 07.08.07 - 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Basic 5 and is the answer not in the manual?

Questions and answers

Related Manuals for SCAN Basic 5

Summary of Contents for SCAN Basic 5

  • Page 1: Table Of Contents

    Maintenance Troubleshooting Congratulations on the purchase of your new Scan stove You have purchased a product by one of Europe’s leading manufacturers of stoves, and we are sure that you will have years of pleasure with your purchase. To make the best possible use of your stove, it is important that you follow the advice and instruc- tions in this manual.

  • Page 2: Installation

    The Scan Basic 5 was built in compliance with the homolo- gised product type specified in the Assembly and Instruction Manual provided with the product.

  • Page 3: Assembly

    You will need this plate with the fittings provided This Scan wood oven has an integrated floor plate and is later as a seal and cover from the the service pack- approved for installation directly on flammable material.

  • Page 4: Smoke Gas Connecting Piece Top Outlet

    Connection between top flue outlet and steel chimney Your Scan dealer, or local chimney sweep, can advise you on choosing a make and type of steel chimney. This ensures that the chimney will match your wood stove. As a...

  • Page 5: Instruction Manual

    I N S T R U C T I O N M A N U A L CB Technology (Clean Burning) Smoke deflector platens Your wood stove is fitted with CB technology. To ensure opti- The smoke deflector platens are located in the upper part mum burning of the gases released by the burning process, of the combustion chamber.

  • Page 6: Instructions For Lighting

    We recommend the use of fire starters, or similar products, Your wood stove is not designed for continual heating for which are available from your Scan dealer. Using fire star- periods of over 24 hours. After longer breaks you should ters helps to light the wood quicker, and keeps the burning check the smoke outlet paths for blockages before lighting.

  • Page 7: Maintenance

    50500140 9401 Hinge door, bottom up by cleaning with a dry cloth and glass cleaner. Your aut- 50500137 940 Locking hook, incl. grub screw horised Scan dealer stocks a special glass cleaner for this and washer purpose. 50500139 940 Closing axis...

  • Page 8: Troubleshooting

    You must quote your stove‘s product registration number • Is the chimney the right height for its surroundings when you contact us or your authorised Scan dealer with a • In case of rear outlet, check that the smoke gas warranty claim.

Table of Contents