Advertisement
Quick Links
I N S T R U C T I O N S
I N S T A L L A T I O N
SCAN
DSA 1
Approved according to EN 13240 2003
This manual is accompanied by a
pamphlet with General Instructions
for Installation.
A N D
Declaration of Conformity
Manufacturer:
Krog Iversen & Co. A/S
DK - 5492 Vissenbjerg
Product:
SCAN DSA 1
Description of product:
Room heater for closed operation
This product complies with the requirements
of the directive
CPD 89/106/EEC
Applied to harmonized standard EN 13240
Signature: _____________________________
Managing director Henning Krog Iversen
Edition 10.06 - GB
F O R
U S E
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SCAN DSA 1
Summary of Contents for SCAN DSA 1
-
Page 1: Declaration Of Conformity
DSA 1 Declaration of Conformity Manufacturer: Krog Iversen & Co. A/S DK - 5492 Vissenbjerg Product: SCAN DSA 1 Description of product: Room heater for closed operation This product complies with the requirements of the directive CPD 89/106/EEC Applied to harmonized standard EN 13240... -
Page 2: Connection To The Chimney
SCAN DSA 1 Congratulations on your Built-in insert Support frame (accessory) new SCAN stove/insert! The support frame is delivered with the following: 2 fittings You have chosen a product from one of Europe's leading 4 screws 5.8 flanged head manufacturers of wood-burning stoves. We are convinced... -
Page 3: Combustion Air
SCAN DSA 1 Fig. 2 Ceramic smoke deflector After the chimney has been swept, you have to remove the soot that has fallen down onto the ceramic smoke deflector. Lift up the deflector in one side and tilt it down in the other side so that the soot falls into the combustion chamber. -
Page 4: Warranty Conditions
SCAN DSA 1 Warranty conditions Technical info All SCAN wood-burning stoves and inserts are made of first-class material and are subject to a strict quality control before they leave the factory. However, if an error should occur, we back all SCAN wood-burning stoves and inserts Emission (% CO at 13% O 2 ): 0.11%...
Need help?
Do you have a question about the DSA 1 and is the answer not in the manual?
Questions and answers