SCAN 48 Instructions For Installation And Use

Wood-burning stove

Download this manual

I N S T R U C T I O N S

I N S T A L L A T I O N

SCAN 48

Approved according to EN 13240 2003

This manual is accompanied by a pamphlet

with General Instructions for Installation.

A N D

Declaration of Conformity

Manufacturer:

Krog Iversen & Co. A/S

DK - 5492 Vissenbjerg

Product:

SCAN 48

Description of product:

Room heater for closed operation

This product complies with the requirements

of the directive

CPD 89/106/EEC

Applied to harmonized standard EN 13240

Signature: _____________________________

Managing director Henning Krog Iversen

Edition 12/05 - GB

F O R

U S E

Table of Contents

Page 1: Declaration Of Conformity
I N S T R U C T I O N S F O R I N S T A L L A T I O N A N D U S E SCAN 48 Declaration of Conformity Manufacturer: Krog Iversen & Co. A/S DK - 5492 Vissenbjerg...
Page 2: Clean Combustion
Please read this manual as well as the General Instructions for Installation before beginning the installation. Clean combustion The SCAN 48 uses the "CB technique" (Clean- Burn) to ensure an optimally clean combustion. Ceramic smoke deflectors The extra combustion air is preheated and led...
Page 3 SCAN 48 Accessories For this model you can have the following accessories: • Baking-compartment door • Top plate in soapstone • Shaped floor plate (steel or glass) • Connection piece for fresh-air intake The stove can be prepared for an external air supply where fresh air is let directly into the combustion chamber (can also be done subsequently by the authorized dealer).
Page 4: Warranty Conditions
You can choose between several floor plates in different shapes and dimensions for your stove. Furthermore, you can have a specially made, shaped floor plate for the SCAN 48, which is to be placed in front of the stove. Please contact your local authorities concerning the security distances needed.