Receiver Connections; Receiver Front Panel - Extron electronics DTP HDMI 230 D User Manual

Receiver Connections

The wall-mountable receiver is in an enclosure that can be mounted in UL-listed standard
wall boxes with Decora-style face plates.
Receiver Rear Panel
Figure 7 shows the rear panel of the DTP HDMI 230 D receiver.
Figure 7.
a
b
1
DTP 230 D Rx
DTP HDMI 230 D Receiver Rear Panel Connectors
Receiver input ports — Connect the opposite end of the twisted pair cable from the
transmitter output connector (see b on the previous page) to this RJ-45 connector (see
Connector and Cable Details
ATTENTION: Do not connect this device to a telecommunications or computer
data network.
DC power input connector — Plug the included external 12 VDC power supply
into either this 2-pole connector (see
wire the power connector) or the power input connector on the transmitter (see
a on the previous page).
DTP HDMI 230 D Transmitter and Receiver • Installation and Operation
POWER
12V
0.8 A MAX
2
on page 10 to properly wire the RJ-45 connectors).
Power Supply Wiring on page 11 to
8