Transmitter Power Indicator; Receiver Power Indicator; System Operation - Extron electronics DTP HDMI 230 D User Manual

Transmitter Power Indicator

a
Power LED — This two-color front panel LED lights to indicate signal and power status
as follows:
•
•

Receiver Power Indicator

b
Power LED — This two-color front panel LED lights to indicate signal and power status
as follows:
•
•

System Operation

After the transmitter, the receiver, and their connected devices are powered up, the system
is fully operational. If any problems are encountered, ensure all cables are routed and
connected properly.
NOTE: Ensure that the video source and display are properly connected to the
transmitter and receiver pair, and that the transmitter, the receiver, and the display
have power applied before power is applied to the video source. If all other devices
are not turned on before the video source, the image may not appear.
Amber — The unit is receiving power but no signal on the HDMI input.
Green — The unit is receiving power and a signal is present on the HDMI input.
Amber — The unit is receiving power but no signal on the TP input.
Green — The unit is receiving power and a signal is present on the TP input.
DTP HDMI 230 D Transmitter and Receiver • Installation and Operation 13