Table of Contents
Advertisement
ENGLISH
It would not be relevant to give a chart that combine all the possible configuration. As
reference here is some tips:
• Avoid the use of larger diameter wheels, especially for lower seat to floor height
• Keep the seat to floor height as high as possible
• Have the armrest as high as possible.
Example of tilt limitation for a 4 wheels configuration on Table 6.
Table 6, Tilt limitation due to armrest/wheel interference. Wheel diameter: 20 inches.
SEAT TO FLOOR ADJUST
0
1
2
3
4
5
Appendix B: Settings and restrictions — NEOX HQC
The instructions below must be followed for proper adjustment of the NEOX HQC Tilt-in-
Space:
• Adjust the seat width according to the order form.
• Adjust the seat depth according to the order form and reference table.
• Adjust the NEOX according to the user's weight (cylinder position and wheels),
according to the reference table.
• Adjust the seat-to-floor height according to the order form. This can result in tilt
limitations; please refer to the tilt limitations table.
Seat depth adjustment
Adjust the seat depth according to table 1. Table 1 assumes that the interface between the
seat back and the user is as shown in figure 1. Different adjustments will be needed if a thicker
cushion or an embedded back is used.
TILT LIMITATION (DEG)
Armrest Height 8"
5.5
9.5
14
19.5
25
28
56
NEOX™ Tilt-in-Space
Armrest Height 10"
14.5
19
23
29
33.5
37
Armrest Height 12"
22
26
31
36
41
46
Advertisement
Table of Contents
