Table of Contents
Advertisement
5.5
Installing the cooktop
INFO
A gap of one millimetre should be planned
between the built-in appliances.
INFO
A gap of two millimetres should be planned
around the built-in appliances.
INFO
The mounting rail supplied with the cooktop
should be installed between the cooktops as
well as between the cooktops and the cooktop
extractor.
INFO
Cable protection (a false floor) should be
mounted below the appliance. This needs to
be removable for maintenance work.
Fig. 5.6 Side view of the cable protection and ventilation
Cross bars on the kitchen unit in the area of the
Q
Q
worktop cut-out may need to be removed.
The drawers and/or shelves in the floor unit must be
Q
Q
removable for maintenance and cleaning purposes.
www.bora.com
5.5.1 Installing the control box behind the
Fig. 5.7 Installed control box and cooktop
100
Fig. 5.8 Control box structure
[1]
[2]
[3]
[4]
[5]
[6]
X
floor unit fixed front panel
6
5
4
Control box
Adjustment plates
Fixed front panel (not included in scope of delivery)
Power level sleeve
Nuts
Control knobs
Draw the bore holes accordingly with the aid of the
X
drilling template provided.
Installation
3
2
1
13
EN
Advertisement
Table of Contents
