Table of Contents
Advertisement
5
Installation
Observe all safety and warning information
X
X
(see the Safety chapter).
Follow the enclosed manufacturer's information.
X
X
INFO
The cooktop must not be installed above
cooling devices, dishwashers, stoves, baking
ovens, washing machines or driers.
INFO
The contact surface of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100 °C).
INFO
Worktop cut-outs must be moisture-sealed
using suitable means or, where necessary,
fitted with a thermal insulator.
5.1
Checking the deliverables
Name
Control box adjustment plates
Control knobs
Operating and installation instructions
Fixing nuts
Cooktop mounting screws
Control box fixing screws
Drilling template
Height adjustment plate set
Allen key
Cooktop
Power level sleeve
Mounting bracket
Cooktop mounting straps
Tepan scraper
Tab. 5.1: Scope of delivery
Check the scope of delivery for damage and make
X
X
sure it is complete.
If there are any missing or damaged parts, please
X
X
notify BORA After Sales Service immediately.
Do not under any circumstances install parts which
X
X
are damaged.
Dispose of transport packaging in the proper manner
X
X
(see the Decommissioning and Disposal chapter).
www.bora.com
5.2
Tool and aids
The following tools are required for the correct installation
of the cooktop:
Pencil
Q
Q
Drill or cordless drill with Forstner bit Ø30mm
Q
Q
Drilling template (included in scope of delivery)
Q
Q
Phillips screwdriver Z2
Q
Q
Silicone sealant for sealing cutting surfaces
Q
Q
5.3
Assembly instructions
5.3.1 Safety distances
Maintain the following safety distances:
X
X
Quantity
6
2
1
2
4
2
1
1
1
Fig. 5.1 Minimum distance
1
2
[1]
Minimum distance of 50 mm at the back from of the worktop
1
cut-out to the rear edge of the worktop.
4
[2]
Minimum distance of 50 mm from the left and right of
1
the worktop cut-out to the adjacent cabinet or wall.
For ergonomic reasons and to ensure efficient cooktop
extraction, a minimum distance of 300 mm is recommended.
[3]
Minimum distance of 700 mm between the worktop and the
wall unit. A minimum distance of 1000 mm is recommended
for ergonomic reasons.
3
2
Installation
EN
1
11
Advertisement
Table of Contents
